Doorking 1820 Manuel d'utilisateur Page 41

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 63
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 40
3.6.3 Program Call Forward Numbers
This programming sequence is used by the doorman or system administrator to program call forward
numbers for residents. If option 2 was selected in 3.6.1, then the area code will be checked to see if
it is allowable or not. If not allowed, the system will ring the resident’s phone. The resident can also
program the call forwarding number from the apartment.
Note: If programmable directory codes are used, enter the directory code number instead of
the relay number in step 3.
Factory Default = (Not Programmed)
1. Take the doorman telephone off hook.
2. Press *40 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter the four-digit relay number of the resident that call forward number is being
programmed for _ _ _ _ then press * (beep).
4. Enter the call forward phone number (1 to 12 digits) then press * (beep).
5. Repeat steps 3 and 4 to program additional resident call forward numbers.
6. Hang up the doorman telephone to end the programming session.
3.6.4 Delete Call Forward Numbers
This programming sequence is used by the doorman or system administrator to delete call forward
numbers for residents.
Note: If programmable directory codes are used, enter the directory code number instead of
the relay number in step 3.
Factory Default = (Not Programmed)
1. Take the doorman telephone off hook.
2. Press *49 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter the four-digit relay number of the resident that call forward number is being deleted
for _ _ _ _ then press * (beeeeeep). Note: entering 9 9 9 9 in this step will delete call
forwarding numbers for all residents. This command can take as long as 20 seconds to
complete. During the erasing process, short beeps will be heard. When all call
forwarding numbers are erased, a long beep will be heard.
4. Hang up the doorman telephone to end the programming session.
1820-065-B-2-06 Page 41
Vue de la page 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 62 63

Commentaires sur ces manuels

Pas de commentaire