Doorking 1820 Manuel d'utilisateur télécharger pdf (Page 31)

3.1.4 Setting the System Time Clock

This programming sequence sets the internal time clock in the 1820 system. (Note – if you only want

to set the time, you can stop after step 4).

Factory Default = (Not Programmed)

1. Take the doorman telephone off hook.

2. Press *33 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter the hour and minutes (HHMM) _ _ _ _ then press * (beep).

4. Enter 0 for AM; or enter 1 for PM _ then press * (beep).

5. Enter the month, day and year (MMDDYY) _ _ _ _ _ _ then press * (beep).

6. Enter the day of the week (1=Sunday, 7=Saturday) _ then press *(beep).

7. Hang up the doorman telephone to end the programming session.

3.1.5 Set the Caller ID Number

The system will provide a Caller ID to the resident phone when a call is generated from either the

entry panel or the doorman/concierge phone. This is necessary because some telephones equipped

with caller ID functions will not work unless a phone number is displayed. The caller ID number may

be set to anything, it has no other function.

Factory Default = 1234567890

1. Take the doorman telephone off hook.

2. Press *41 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter the 10-digit caller ID number _ _ _ _ then press * (beep).

4. Hang up the doorman telephone to end the programming session.

3.1.6 Set the Talk Time

Talk time is the length of time that the 1820 system will allow communication to take place before

disconnecting. Talk time is set using a three digit code to set the time in seconds. Talk time can be

set from 001 to 255 seconds.

NOTE: When a DoorKing lobby panel is connected to the system, talk time should be set to

255 seconds. The lobby panel talk time should be set to the desired time and will override the

talk time set here. Refer to the lobby panel programming instructions to set the lobby panel

talk time.

Factory Default = 060

1. Take the doorman telephone off hook.

2. Press *08 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter the three-digit talk time in seconds (001 – 255) _ _ _ then press * (beep).

4. Hang up the doorman telephone to end the programming session.

1820-065-B-2-06 Page 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 62 63

Pas de commentaire

Doorking 1820 Manuel d'utilisateur Page 31