Doorking 1820 Manuel d'utilisateur Page 35

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 63
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 34
3.3 Dedicated Phone Line Access
An optional dedicated central office (C.O.) phone can be connected to the 1820 system. Connecting
a C.O. line to the system provides additional functions available to the doorman/concierge and the
lobby panel can be programmed to dial an outside line under certain circumstances. It also allows
remote programming via a PC and modem when using a DoorKing 1833, 1834, 1835 or 1837 as the
lobby panel.
3.3.1 Doorman/Concierge Outside Line Access
When the optional dedicated telephone line is connected to the 1820 system, the doorman may have
unrestricted use of this line. This requires an access code to be entered on the doorman phone each
time the doorman wants to access the outside line. Code must be between 4000 and 9999. Be sure
that you do not duplicate doorman/concierge or lobby panel codes (see section 3.2.3).
Factory Default = (Not Programmed)
1. Take the doorman telephone off hook.
2. Press *09 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter a four-digit access code (4000 – 9999) _ _ _ _ then press * (beep).
4. Hang up the doorman telephone to end the programming session.
3.3.2 Preprogrammed Phone Numbers
When the optional dedicated telephone line is connected to the 1820 system, up to 10
preprogrammed telephone numbers can be stored in the system memory. Preprogrammed
telephone numbers can be up to 12 digits in length. These numbers can be called by entering a four-
digit code on the lobby panel telephone or the doorman/concierge telephone (see operating
instructions). Code must be between 4000 and 9999. Be sure that you do not duplicate
doorman/concierge or lobby panel codes (see section 3.2.3).
Factory Default = (Not Programmed)
1. Take the doorman telephone off hook.
2. Press *10 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter a four-digit directory code (4000-9999) _ _ _ _ then press * (beep).
4. Enter the desired preprogrammed number (12 digits maximum), then press * (beep).
5. Repeat steps 3 – 4 to enter up to 9 preprogrammed numbers.
6. Hang up the doorman telephone to end the programming session.
1820-065-B-2-06 Page 35
Vue de la page 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 62 63

Commentaires sur ces manuels

Pas de commentaire