DoorKing 1812 Manuel du propriétaire télécharger pdf (Page 32)

Page 32 1812-065-M-3-07

2.6.1 Four-Digit Entry Code Programming

This programming sequence programs four digit entry codes into the system memory. You can store

up to 50 unique entry codes into the system memory, however these codes will perform different

functions dependent on the location code that they have been stored in. Each relay can have 14

momentary activation codes, one flash code, five hold codes, and five time zoned codes. We suggest

that you keep a log of all entry codes programmed into the system (see appendix).

1. Press * 0 2 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter the location code _ _ then press * (beep).

3. Enter the four-digit entry code _ _ _ _ then press * (beep).

4. Repeat steps 2 and 3 to enter additional codes.

5. Press 0# TOGETHER to end this programming step (beeeeeep).

2.6 ENTRY CODE PROGRAMMING

Relay 1 Relay 2

Location Code Function Location Code Function

01 – 14 Momentary 26 – 39 Momentary

15 Flash 40 Flash

16 – 20 Hold 41 – 45 Hold

21 - 25 Time Zoned 46 - 50 Time Zoned

2.6.2 Delete Four-Digit Codes

This programming sequence allows you to delete individual four digit entry codes.

1. Press * 0 2 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter the location code _ _ then press * (beep).

3. Enter # # # # then press * (beep).

4. Repeat steps 2 and 3 to delete more entry codes.

5. Press 0# TOGETHER to end this programming step (beeeeeep).

2.6.3 Delete ALL Four-Digit Entry Codes

This programming sequence deletes all four-digit entry codes that have been programmed into the

system. CAUTION: this programming step is irreversible once it is started.

1. Press * 0 0 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Press 9 9 9 9 * (beep). This programming sequence will automatically end itself. This

will be indicated by a long tone (beeeeeep).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 46 47

Pas de commentaire

DoorKing 1812 Manuel du propriétaire Page 32