DoorKing 1812 Manuel du propriétaire télécharger pdf (Page 29)

2.5.1 Call Forward Programming

These steps program the call forwarding telephone number into the 1812 memory. Call forwarding

can only be used when the 1812 is programmed in phone mode (see 2.3.3).

1. Press and enter the four-digit MASTER CODE (beep).

2. If the forwarding number is long distance, press then enter the area code

and then press (beep). If the forwarding number is 10 digits, press then enter

the area code and then press (beep). If the forwarding number is local,

press then press (beep).

3. Enter the seven-digit phone number then press (beep).

4. Press TOGETHER to end this programming step (beeeeeep).

2.5.2 Call Forward On / Off

These programming steps are used to turn call forwarding on or off.

1. Press and enter the four-digit MASTER CODE (beep).

2. Press (beep) to turn call forwarding ON,

press (beep) to turn call

forwarding OFF.

3. Press TOGETHER to end this programming step.

2.5.3 Preprogrammed Phone Numbers

The 1812 system has the capability of calling out to three preprogrammed phone numbers from the

system keypad. These numbers are different than the call forwarding number that was programmed

in 2.5.1. When a visitor presses 01, 02, or 03 on the system keypad, the 1812 will call the

preprogrammed phone number programmed under the specific directory number. This feature cannot

be used if the 1812 is programmed in the intercom mode (2.3.3).

To program the number that will be called when 0 1 is pressed on the keypad:

1. Press (

see note below

) and enter the four-digit MASTER CODE

(beep).

2. If the number to be called is long distance, press then enter the area code

and then press (beep). If the forwarding number is 10 digits, press then enter

the area code and then press (beep). If the number to be called is local,

press then press (beep).

3. Enter the seven-digit phone number then press (beep).

4. Press TOGETHER to end this programming step (beeeeeep).

STEP 1 NOTE

Press to program the phone number called when 02 is pressed on the keypad.

Press to program the phone number called when 03 is pressed on the keypad.

2.5 PROGRAMMING DIAL-OUT FUNCTIONS

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 44 45

Pas de commentaire

DoorKing 1812 Manuel du propriétaire Page 29